User's Manual

~
75
~
9. Item 8 is to add new bases.
From an administrator handset (Handset 10 or 11) to set new
Base 01~07. Maximum additional bases is up to 8. Before adding
a new base, the Handset must be registered in master base(Base
ID =00).
a.
Press
REG
button on new Base.
b.
Use Handset 10 or 11 to Add base: Press
MENU

8

1
c.
Enter 01~07 (base ID)
10. Press 9 to change system and Line setting: See System and Line Setting.
~
76
~
Technical Specifications
Electrical Specifications
Portable Handset
Frequency
902
-
928 MHz
RF Output Power
Peak:
26 dBm
Average: 20 dBm
Channel Spacing
200
kHz
Number of Channels
128
Modulation
Different
ially Encoded MSK
Multiple Access
Frequency Hopping TD
D
Frequency Hopping Rate 100 per second
TDD
Frame Length
10 ms
Number of Slots/Frame
4
Receiver Sensitivity
<-108dBm (@ BER 10
-
2
)
Antenna Gain
Long: 2.
dBi
; Short: 1.5 dBi
Antenn
a Connector
P
roprietary
Telephone Interface
NA
Channel Coding
8 kbps Convolutional + CRC
Transmission Data Rate
176.678
kbps
Speech Coding
8 kbps G.729
User Data Rate
128
kbps duplex
Duplex
Time Division Duplex (TDD)
Number
of System ID
65,536
Ring Signal
NA
Flash Time
NA
Power Source 3.7V/1100mAh Li-Ion Battery
Charge Time
3hours
Regulation Compliance
FCC Part 15, Part 68
Hearing Aid Compatible
Canada RSS-210, CS03
Operating Temperature -10 – 60 °C
Storage Temperature
-40 – 70 °C
Humidity
20
–
75 %
Notes:
1. NA = Not Applicable.
2. The manufacturer reserves the right to change designs and specifications without
notice.