User's Manual

~
61
~
Notes:
1. This feature would be useful if the DuraFon 1X base unit is
adjunct to a PBX system.
2. Only “Mute” function will be displayed if you have not
preprogrammed any PBX features into the system.
3. The DuraFon 1X’s Programmable PBX Options may not function
with all PBX / Key systems due to the diversity of various
proprietary systems.
~
62
~
Programmable PBX Options (Register to PRO base only)
1. When DuraFon PRO base unit installed behind the PBX
system, it is feasible to pre-program some PBX features
along with their feature codes into the system.
2.
Up to 9 most frequently used PBX feature codes
can be pre
-
programmed.
3.
Name and enter PBX feature codes:
a.
Press
MENU
(Right) soft key while the handset is
in standby.
b.
Press “5” following by “
9
” to enter “PBX Options”
menu.
c.
Press
ADD
soft key to edit a PBX feature to be
memorized.
d.
Key in the name of the PBX features just like
editing a phonebook entry i.e. PBX Transfer.
Press
SAVE
to confirm your entries.
e.
Key in the feature code of the correspondence
PBX feature i.e. Flash*70. Press SAVE to confirm
your entries.
f.
The first PBX feature and the correspondence
feature code you enter will appear on the LCD
screen.
[note] “F” represents the Flash signal
g.
Press
OPTION
soft key to Erase or Edit the PBX
feature you program into the system.
h.
Repeat the same operation to edit the second and
even the third PBX feature that you will use
frequently.
4
.
Using pre
-
programmed PBX feature during the call.
a.
Press
OPTION
soft key while the handset is in
talk mode
.
b.
Press the correspondence number of the function
you want to perform i.e. press 1 to perform “PBX
Transfer” function.
c.
Press when you finish the desired function
and back to standby mode.



11

Settings: 
8. Line Select
9. PBX Options



11

Empty
ADD



11

Feature Name?
Caps = *
SAVE DELETE



11

Feature Code?
SAVE DELETE



11

PBX Transfer
F*70
ADD OPTION



11

00:00:16
Volume:4
OPTION HOLD



11

1. PBX Transfer
0. Mute