User's Manual

~
57
~
Call barring (Register to 1X base only)
1. Block the users from dialing the long distance calls or international calls. You
need the password to enter the setting. The default PW is “0000”.
2.
Use or scrolling key to switch between On and
Off of this setting. The default is “Off”. Press SAVE to
confirm your selection.
3.
To edit the Call barring code
a. Once turn on the call barring feature, you can key in
the “call barring” code.
(1) Up to 5 digit can be edit to be call barring code.
For example, if you want to block all call dialing to
Manhanttan, NY area, you can enter 1212 as the
call barring code.
(2) If you base station is adjuct to a PBX system,
please also include that specific number to
retrieve the
PSTN tone.
b.
Press
OPTION
to erase or edit the call barring codes.
b.
Up to 5 set of call barring codes can be programmed.
Notes:
Character Table:
Key
Characters and Orders
1
‘ + , . ＊ ( ) & 1
2
A B C 2
3
D E F 3
4
G H I 4
5
J K L 5
7
P Q R S 7
8
T U V 8
9
W X Y Z 9
0 0
＊
Toggle case when in character editing
＊ P (Pause) when in number editing
#
Space
–
when in character editing
# when in number editing



11

Call Barring 
On
SAVE SET PW



11

Option: 
1. Erase
2. Edit



11

Call Barring:
1212
ADD
OPTION
~
58
~
Text Messaging (Register to 1X base only)
1. Short text messages, up to 25 characters each, can be sent from a handset to
another handset or a group of handsets.
2. Up to 5 outgoing messages can be edited, stored and sent. They are stored in
the “Outbox” in the order they are entered, with Message 01 being the most
recent entry. The message counter on the upper right corner of the LCD
display shows the message ID.
3. Up to 5 received messages can be stored for later reference. They are stored
in the “Inbox” in the order they are received, with Message 01 being the most
recently received. The message counter on the upper right corner of the LCD
display shows the message ID.
4.
Viewing and editing outgoing text messages:
a. Press MENU (Right) soft key while the handset is in
standby.
b.
Press “7”
following by “2”
to enter Outbox menu.
c.
Press
ADD
(Left
) soft key to enter a new text message.
(1) Enter characters using the Character Table and
method discussed in the Phonebook section.
(2)
Use or scrolling key to move the cursor
backward or forward to insert character or delete
the character. For example, you are editing the
message 1 as “Meeting now.”
(3) When finished, press SAVE (Left) soft key to save
change. You will see the Text Message ID as 01 on
the upper right corner of the LCD screen.
5.
Sending a text message:
a.
While viewing the message, press key followed
by a Handset ID or a Group ID (01-09).
b.
The current message is sent.
c.
There will be no acknowledgement returned.
6.
To erase or edit the current messages:
a.
Press
M
ENU
-
7
-
2 to enter outbox text messag
e.
b. Press OPTION (Right) soft key to erase or edit the
current message:
(1) Press “1” and confirm to erase message.
Subsequent messages will be moved up in the



11

Tex Message
1. Inbox
2. Outbox



11

Meeting now
SAVE12 ODELETE



11
01

Meeting now
ADD12 OOPTION



11
01

Please enter
Ext. #: 02
Send this
message to
Group 02

11
01

Sending…