User's Manual

~
43
~
handset to a damaged handset. You need to clear this
registered handset ID on the base station before you
register this new handset. Press Menu-9 and enter
the two
-
digit base ID
to enter the System mode.
b.
Press 3 and then enter two digits ID number to be
assigned . You will see “Saving Configuration”
and a Done confirmation.
4.
Assign HS:
Set next Handset ID to be assigned
a.
This function is useful if you want to as
sign a designed
handset ID to a specific handset. Press
Menu-9 and enter the two-digit base ID to enter
the administration mode
.
b.
Press 4 and then enter two digits ID number to be
assigned. You will see “Saving Configuration”
and a Done confirmation.
3-Way Conferencing (Register to PRO base only)
1. While a telephone call is in progress, you can place call on hold
and bring in another phone line or another handset for a 3-way
conference.
2.
Press
HOLD
(Right) so
ft key to put the current call on hold.
3.
Press
OPTION
(Right) soft key to enter selection menu.
4.
3
-
Way Conferencing
with a Second Handset:
a. Press number 2 and enter a two-digit Handset ID to call
another handset extension.
b. After the second handset answers, press the CONF (Left) soft
key.
c. Two handsets and one phone line can now talk
simultaneously. Any one party can drop out of the 3-way
conferencing, leaving the remaining two parties still
connected.
5.
3
-
Way Conferencing
with a Second Phone Line:
a.
Press number
1
and enter a phone number to call another



11

System: 
3. Clear HS
4. Assign HS



11

Please Enter
Ext. #:**
CANCEL



11

Please Enter
Ext. #:**
CANCEL
~
44
~
phone line.
b.
After the second line answers, press the
CONF
(Left) soft key.
c. One handset and two phone lines can now talk
simultaneously.
I.
If one phone line hangs up, the handset continues
talking to the remaining phone line.
II. If the handset presses key, the 2nd phone line
will be dropped. The handset and the first phone line
continue conversation.
Notes:
1. 3-way conferencing between 3 handsets is not supported.
2. Unlike 3-way conferencing provided by the phone company, 3-way
conferencing involving 2 phone lines will take up two physical lines, leaving
only two lines left available for other handsets. The handset must have access
to a second line.
Base Select (Register to PRO base only )
1.
A handset can manually select the desired base station before
access outbound line.
2.
Press handset
MENU
(Right) sof
t key.
3.
Press the number
5
, this will enter the handset setting menu.
4.
Press number
3
, handset enters Base Select setting mode.
5
Use or arrow to scroll up and down the selection
on/Off.
6.
Make a selection (default =off), and p
ress
SAVE
(Left softkey).
Re: When turns on the Base Select, you must enter 2-digit Base
ID after press key.
Notes:
1. Because this setting allows handset manually select the base station, the
handset must be in range with the direct base station.