User's Manual

~
39
~
base.
h. Perform registration immediately afterward for the handset desiring a
specific ID to ensure that the ID is not taken by another handset.
5.
Remotely register Handset
:
a. If base install in ceil or higher location, administrator handsets can perform
remote registration
.
b.
Press administrator handset
MENU
(Right) soft key
c.
Press the number
6
,
this will enter reg
istration mode
.
d. Press number 3 , this will replace the procedures to press & hold the base
REG
button until the L1, L2, L3 and L4 LED come on
.
e.
Proceeding the handset registration process for new handsets.
Notes:
1. De-registration by the administrator will disable a handset’s ability to use the
base station to make or receive phone calls. This also frees up the ID for future
registration.
2. Handsets de-registered by the administrator can still perform intercom to other
handsets.
Handset Group Subscription
1. When register to 1X base, there are up to nine handset groups (01-09) can be
defined and handsets can decide which group(s) they want to be in.
2. When register to PRO base, there are up to seven handset groups (01-07) can be
defined and handsets can decide which group(s) they want to be in.
3. For example, Group 1 represents the Customer Service Group, Group 2
represents the Sales Group, and Group 3 is the Marketing Group. Suppose that
Handset 11 wants to receive incoming rings for all Sales and Marketing related
calls. Then handset 10 will need to “subscribe” to Group 2 and Group 3.
4
.
Group Selections:
a. Press handset MENU-5 to enter the handset setting
menu
b.
Press number “
2
”, handset enters grou
p select menu.
c. Press ADD soft key and enter two-digit group number
(
0
1
-
0
9) to add membership in a group.
d.
Repeat for all desired groups.
e.
Delete group selections by pressing
DELETE
key and



11

Settings: 
1. Dial Prefix
2. Group Selection



11

Groups
ADD DELETE
~
40
~
enter group number.
Notes:
1. The handset can change group affiliations at any time.
2. The base (administrator) is not responsible for group
assignments. Consequently, it cannot de-subscribe a handset
from a group.
Call Transfer (Register to 1X base only)
1. While a telephone call is in progress, you can place call on hold and transfer
the call.
2.
Press
HOLD
(Right) soft key to put call on hold.
3.
Press
OPTION
(Right) soft key to enter selection menu.
4.
T
wo
types of transfer method
:
a.
Un
-
announced Call Transfer:
Press before the destination handset answers,
the call is automatically transferred to the
destination handset.
b.
Announced Call Transfer:
(
1
)
Speak to the destination handset.
(2)
Press XFER (Right) soft key or the to end
announcement. The call is transferred to the
destination handset.
Notes:
If the destination handset does not answer after handset
paging timeout, the call is routed back to the originating handset.
Call Transfer (Register to PRO base only)
1. While a telephone call is in progress, you can place the call on hold and
transfer the call.



11

You have a
Call on hold
UNHOLD OPTION



11

1.Unused
2.UnancdXfer HS
3.AncdXfer HS



11

System: 
2. Flash
3. Xfter PBX