User's Manual

~
37
~
c.
Press handset key “
3
”, then enter the base ID i.e. 20
for 2nd base, 30 for 3rd base, or 40 for 4th base.
this completes the registration process.
Handset Registration (Register to PRO base only)
1. When 1
st
time using the handset, you need to register the handset to the base
station (The handset ID is 00 before registering to the base station
) .
2. In certain situations, you may want to change a handset’s ID. For example,
you want to change a particular handset from a user to an administrator (ID 10
or 11), or vice versa. Or in some rare occasions, you find another handset
having the sa
me Handset ID.
3.
Registration
:
a.
Press
MENU
-
6
to enter the registration mode
b.
Press and hold the base’s Registration
(
REG
) button for 2 seconds until the
L1, L2, L3, and L4 LED come on.
c. Press handset key “1”, this completes the registration process. The base
station will assign a handset ID between 10 and 99. The assigned ID will
be displayed on the handset LCD, indicating successful registration.
d.
Repeat above steps for all additional handsets.
e. The first two handsets registered will be given ID 10 and 11, which gives
them administrator privileges.
Re : Base 00 is a primary base. All handse
ts m
ust register to Base 00.
4.
De
-
registration
:
a. You can de-register a handset from a base. De-registration will reset the
Handset ID to 00, erase the system security code, and free up the old ID
for future registration.
b. After deregistration, the handset will not be able to use the base to make
or receive phone calls, nor can it use the intercom to reach other
handsets.
c.
Press handset
MENU
(Right) soft key.
d. Press the handset number key 6 , this will enter the handset registration
menu.
e. Press and hold the base’s REG button for 2 seconds until L1, L2, L3, and L4
LED come on
f. Press the handset number key 2 , this completes the de-registration
process. Upon successful de
-
registration, the handset will show ID “00”.



11

Registration: 
2. Deregister
3. Set Base
Selection
~
38
~
Notes:
1. The base has a 30 second registration timeout starting from pressing
the REG button. The handset has a 12 second registration timeout
starting from the time registration or de-registration option has been
selected. The base and handset will automatically exit registration
mode after timeout.
2. Repeat registration or de-registration process if unsuccessful.
Advanced Registration (Register to PRO base only)
1. Advanced registration functions can be performed by administrator handsets
(ID 10 and 11) only.
2.
Administrato
r handsets can perform advanced registration function as long as
it is within range with the base station. The base station does not need to be
in registration mode.
3.
De
-
register a Handset ID
by administrator:
a. Make sure that the administrator handset is within the coverage range of
the base station.
b.
Press administrator handset
MENU
(Right) soft key
c.
Press the number
9
, this will enter the handset administration menu.
d.
Press number
1
, handset enters system sett
ing menu.
e.
Press number
4
,
and enter the two
-
digit Handset ID
to be cleared.
f. Upon successful operation, the handset LCD will display “Done”, otherwise
it will show “Message not received, try again”.
4.
Obtain a Specific H
andset ID
:
a. If a particular Handset ID is preferred over sequentially assigned ID, the
administrator can “tell” the base in advance what the next ID assignment
should be.
b.
Press administrator handset
MENU
(Righ
t) soft key.
c.
Press the number
9
, this will enter the handset administration menu.
d.
Press number
1
, handset enters system setting menu.
e. Press number 5 , and enter the two-digit Handset ID to be assigned next
by the base
.
f. Upon successful operation, the handset LCD will display “Done,” otherwise
it will show “Message not received, try again.”
g. If the handset ID is already in use by another handset, the administrator
will be alerted. In that case, the administrator can choose another ID or
asks the handset having the desired ID to vacate by de
-
registering with the