User's Manual

~
21
~
Charger Illustration
Handset charging slot
DC in
~
22
~
Charger Features
1.
DC In
Connects to Charger AC Adaptor.
2.
Handset Charging Slot
a.
Charge handset battery when handset is placed in cradle.
b.
Refer to the ha
ndset LCD for charging status
.
(1) Charging: battery status bar is running and the LCD screen showed:
Charging
.
(2) Fully Charged: battery status bar stands still and the LCD screen would
display “Fully Charged”
.
(3) Charge Fail: Should there be any error occurred during charging mode,
the LCD screen would display “Charge Fail”
.
3
.
It is impossible to overcharge the battery using this charger.
Notes:
1. Fully charge battery packs before first use.
2. Both handset and spare batteries can be charged at the same time.
3. Handset will be “power on” automatically when placing on the charging
slot.
4. However, if you run drain the battery, it would take around one minute for
handset to auto power on.
4. You can’t turn off the power while you charge the handset. A warning message:
“
Unplug Charger then OFF again
” will be shown on the LCD display.