User's Manual

~
19
~
b.
Announced Transfer: speak to the destinati
on handset before transferring a
telephone call.
1
9
.
Call Conferencing
(
Register to
PRO
base
only
)
a.
2
-
handset and 1
-
line conferencing.
b.
1
-
handset and 2
-
line conferencing.
20.
Line Selection
(
Register to
PRO
base
only
)
When enabled from the handset menu, a handset user will be prompted to
select from a list of available lines before making an outgoing call.
2
1
.
Programmable PBX Options
:
a.
Allow user to pre
-
program the most
frequently used PBX feature
along with its feature code into DuraFon which is adjunct to the PBX
system
.
b.
Up to 9 entries can be saved
.
c.
Once the feature and feature codes being programmed, you can
quick perform those functions during the call by pressing OPTION
soft key
.
22
.
Base Selection
When enable from the handset menu
,
a handset user can manually
select the
base which is the nearest one with user before making an outgoing call.
23.
Repeater Operation
(
Register to
PRO
base
only
)
In order to get better range performance for handset to handset calls
(intercom
and broadcast), install a repeater and make the calls via repeater is able to
extend the range of handset to handset calls.
Administrator Features (Register to 1X base only)
Handsets 11 and 12 are designated administrators. Both have the same authority
to perform base station administrative functions from their handset menu
selections. No password is required and to remember.
1.
Supports both DTMF and Pulse dialing
a. From an administrator handset (Handset 11 or 12), press MENU-9-1- enter
base ID(
10,20,30,40)
-
1
to select Tone or Pulse dialing mode.
b.
Default is Tone dialing.
~
20
~
2.
Administrator programmable Flash
key timing
a. From an administrator handset (Handset 11 or 12), press MENU-9-2- enter
base ID(
10,20,30,40)
-
4
to select flash key timing
.
b.
9
-
level (100 ms
-
900 ms) timing selections, default=
6
00 ms.
c. The default value (600 ms) works in most areas. Changing this setting may
cause Flash key not working. Change only when you are certain of the new
value would work.
3.
Call transfer to PBX extension
a. When install the DuraFon 1X behind the PBX system, you can pre-program
the feature code o
f call transfer function
.
b.
Need to adjust the Flash time to match your PBX setting
.
Administrator Features (Register to PRO base only)
Handsets 10 and 11 are designated administrators. Both have the same authority
to perform base station administrative functions from their handset menu
selections. No password is required.
1.
Supports both DTMF and Pul
se dialing
a. From an administrator handset (Handset 10 or 11 ), press MENU- 9 – 1 –
enter base ID(00
–
07)
-
1
to select Tone or Pulse dialing mod
e.
b.
Default is Tone dialing.
2.
Administrator programmable Flash
key timing
a. From an administrator handset (Handset 10 or 11), press MENU- 9 -1-
enter base ID(00
–
07)
-
2
to select flash key timing
.
b.
9
-
level (100 ms
-
900 ms) timing selectio
ns, default=
6
00 ms
.
c. The default value (600 ms) works in most areas. Changing this setting may
result in Flash function not working. Change only when you are certain
the new value will work.
3.
Call Transfer to PBX Extension
a. When the DuraFon PRO is installed behind a PBX system, you can pre-
program the feature code of call transfer function.
b.
Need to adjust the Flash time to match your PBX setting.
Re: If loosing administrator handsets (handset 10 and 11), all settings must be
reset (
reset the base and re
-
register all handsets).