User Manual

15
6 Configuring Range Extender
This section will show you how to configure the device using the web-based configuration interface.
Please use your wireless network adapter to connect the Range Extender.
Default Settings
IP Address
192.168.1.2
Username / Password
admin / admin
Wireless Mode
Enable
Wireless SSID
EnGeniusxxxxxx
Wireless Security
None
There are two ways to setup Range Extender.
1. Quick Setup
2. Smart Setup.
Please refer to Section 7 for detail information.
For expert users, if you need to configure advanced settings, please make use of the “expert mode” under Section 8.
Note: xxxxxx mentioned in the wireless SSID above is the last 6 characters of your device MAC Address. This can be found on the device body label
and is unique for each device.