User Manual

54/108M Wireless PCI Adapter User Guide
- 14 -
Cells is checked on the Security Tab to allow association. To complete WEP encryption
configuration, you must select the 802.11 Authentication Mode as appropriate on the
Advanced tab of this Profile Management dialog.
Figure 3-5 Security tab of Profile Management
Figure 3-6 Define Shared Keys
3. Edit the Advanced tab
¾ Transmit Power Level - Selects the transmit power level for 802.11b/g in mW. Actual
transmit power may be limited by regulatory domain or hardware limitations.
¾ Power Save Mode -
• Maximum -
Selects maximum mode to let the access point buffer incoming
messages for the wireless adapter. The adapter will detect the access point if
any messages are waiting periodically.
• Normal - In Normal mode, the adapter will be switched to maximum mode