User's Manual

- 1 -
Scan Available Networks
1. Click Scan on the Profile Management, the Available Infrastructure and Ad Hoc Networks window
will appear.
2. Click Refresh to refresh the list at any time.
3. Highlight a network name and click Activate to connect an available network. If no configuration
profile exists for that network, the Profile Management window will open the General tab. Fill in the
Profile name and click OK to create the configuration profile for that network.
Auto Profile Selection Management
The auto selection feature allows the wireless adapter to automatically select a profile from the list of
profiles and use it to connect to the network. To add a new profile into the Auto Selected Profiles list,
please follow these steps.
1. On the Profile Management tab, click Order Profiles….
2. The Auto Profiles Selection management window will appear, with a list of all created profiles in the
Available Profiles box.
3. Highlight the profiles to add to auto profile selection, and click Add. The profile will appear in the Auto
Selected Profiles box.
4. Highlight a profile in the Auto Selected Profiles box.
5. Click Move Up or Move Down as appropriate. Note: The first profile in the Auto Selected Profiles
box has highest priority, and the last profile has lowest priority.
6. Click OK.
7. Check the Auto Select Profiles checkbox on the Profile Management tab.
Note: When auto profile selection is enabled by checking Auto Select Profiles on the Profile
Management tab, the client adapter will scan for an available network. The profile with the highest
priority and the same SSID as one of the found networks will be used to connect to the network. If the
connection fails, the client adapter will try the next highest priority profile that matches the SSID until an
available network is found.