User's Manual

-
8 -
Available Network
This page displays the information of surrounding APs from last scan result. The tab lists the
information including SSID, Channel, Encryption, Network Authentication, Signal, Type, BSSID,
Supported Rate (s), and Mode.
Network Tab
SSID
Shows the network name of the access points.
Channel
Shows the currently channel in use.
Encryption
Shows the encryption type currently in use. Valid value includes WEP,
TKIP, AES, None and TKIP/AES.
Network
Authentication
Show the device network authentication.
Signal
Shows transmit power, the amount of power used by a radio transceiver to
send the signal out.
Type
Network type in use, Infrastructure or Ad-Hoc mode.
BSSID
Shows Wireless MAC address.
Supported Rate(s)
Shows the transmitting data rate.
Mode
Supported wireless mode. It may support 802.11b, 802.11g and 802.11n
wireless mode.
Refresh
Click Refresh button to search and rescan the available network.
Add to Profile
Select an available network (SSID) on the list and then click Add to Profile
button to add it into the profile list.
Note
Double click on item to join/create profile.
Status
This tab listed the information about the WLAN Module and connected access point.