User Manual

11a/b/g Wireless Multi-Client Bridge/AP/WDS Version 2.4
31
 TX Packets Dropped: The number of packets that were dropped while being sent,
due to errors, collisions, or bridge resource limitations.
 RX Packets Dropped: The number of packets that were dropped while being
received, due to errors, collisions, or bridge resource limitations.
 Collisions: The number of packets that were dropped due to Ethernet collisions (two
or more devices attempting to use an Ethernet circuit at the same time).
 Errors: The number of transmission failures that cause loss of a packet. A noisy
radio-frequency environment can cause a high error rate on the wireless LAN.
 Click on the Refresh Statistics button to refresh the events or click on the Clear
Statistics button to clear the events.Bottom of Form
3.6 Logs
 Click on the Logs link on the navigation drop-
down menu. Logs display a list of events that are
triggered on the Ethernet and Wireless interface.
This log can be referred when an unknown error
occurs on the system or when a report needs to
be sent to the technical support department for
debugging purposes.
 Log Options: Select the type of warning that you would like recorded and place a
check in the appropriate box. Then click on the Apply Log Settings Now button.