User Manual

11a/b/g Wireless Multi-Client Bridge/AP/WDS Version 2.4
30
 IP Address Mode: Select the Static or DHCP radio button. If you select DHCP radio
button, you are not required to enter the rest of the fields, as the IP address will be
provided to the device by the AP or DHCP server. If you select the Static radio
button, you must enter the IP address, subnet mask, and default gateway.
 IP Address: Enter an IP address for this device.
 Subnet Mask: Enter the subnet mask for this IP address.
 Default Gateway: Enter the IP address of the default gateway.
 Click on the Save Settings button once you have modified the settings.
Note: If you change the IP address here, you may need to adjust your PC’s network
settings to access the network again.
3.5 Statistics
 Click on the Statistics link on the navigation
drop-down menu. This page displays the
transmitted and received packet statistics of
the wired and wireless interface.
 Sent: The number of packets sent from the bridge.
 Received: The number of packets received by the bridge.