User Manual

11a/b/g Wireless Multi-Client Bridge/AP/WDS Version 2.4

 Transmission Rate: Select a transmission rate from the drop-down list. It is

recommended to use the Best (automatic) option.

 802.11 Mode: Select 802.11a only. Do not use this option when configured at Ad-

Hoc mode.

 Setting ACK_A Timeout: You may specify a time out value, however, it is

recommended to use the default setting: 40

 Click on the Save Settings button once you have modified the settings.

Remark 3: Per RSS-210, all UNII devices shall not be capable of transmitting in 5600-

5650MHz band. Engenius wireless AP/ Client Bridge will have a special firmware to

modify the utility for Canadian users, you will not able to use 5600~5650MHz for any

transmitting.

3.3.3 Wireless 802.11b Configuration

 Click on the 11b link under the Wireless menu. The first part of this page allows you

to save the configuration. Click on the Save Settings button once you have modified

the settings.

3.3.3.1 802.11b Infrastructure / Ad-hoc Mode

 Wireless Mode: Select the Infrastructure or Ad-Hoc radio button. Infrastructure is a

point-to-multipoint (PtMp) topology where as Adhoc is a point-to-point topology (PtP).

 Wireless Network Name: The SSID is a unique named shared amongst all the

points of the wireless network. The SSID must be identical on all points of the

wireless network and cannot exceed 32 characters.