User Manual

11a/b/g Wireless Multi-Client Bridge/AP/WDS Version 2.4
22
 Preferred BSSID: The device may connect to a preferred Access Point by specifying
the MAC address of the Access Point.
3.3.2 Wireless 802.11a Configuration
 Click on the 11a link under the Wireless menu. The first part of this page allows you
to save the configuration. Click on the Save Settings button once you have modified
the settings.
3.3.2.1 802.11a Infrastructure / Ad-hoc Mode
 Wireless Mode: Select the Infrastructure or Ad-Hoc radio button. Infrastructure is a
point-to-multipoint (PtMp) topology where as Adhoc is a point-to-point topology (PtP).
 Wireless Network Name: The SSID is a unique named shared amongst all the
points of the wireless network. The SSID must be identical on all points of the
wireless network and cannot exceed 32 characters.
 Channel: Select a channel from the drop-down list. The channels available
are only
between 5150~5250 and, 5745~5825MHz
based on the country’s regulation. When
selecting Infrastructure mode, a channel is not required, however, when selecting
Adhoc mode, you must select the same channel on all points.
Remark: Both Ad-hoc and bridge function of NOC-8610 in 5250-5350 and 5470-
5725MHz have been disabled and are not available to the user.