User Manual

Long Range Wireless Access Point / Client Bridge Version 1.0
61
 Trap Community Name: Specify the password for the SNMP trap
community.
 Click on the Apply button to save the changes.
6.6.3 Backup/Restore settings, Reset to factory default settings
 Click on the Backup/Restore Setting link under the Management
menu. This option is used to save the current settings of the device
in a file on your local disk or load settings on to the device from a
local disk. This feature is very handy for administrators who have
several devices that need to be configured with the same settings.
 Save a copy of the current settings: Click on the Backup button to
save the current configuration.
 Restore saved settings from a file: Once a file has been backed up,
you may restore it by clicking on the Browse button to select the file,
and then the Restore button.
 Revert to factory default settings: Click on the Factory Default
Settings button to reset the device to the default settings. Please
wait while the device restart and then access the device using the
default IP address: 192.168.1.1