User Manual

Long Range Wireless Access Point / Client Bridge Version 1.0
6
- PPPoE Point-to-Point Protocol over Ethernet at Client Router
mode. This function will keep trying when failed or disconnected
Security
- 802.11i WEP, WPA, WPA2 (Encryption support TKIP/AES)
- MAC address functions MAC address filter (AP mode)
- 802.1x IEEE802.1x Authenticator
- Station isolation
Management
- Firmware Upgrade Upgrading firmware via web browser, setting
are reserved after upgrade
- Reset & Backup Reset to factory default. User can export all
setting into a file via WEB
- MIB MIB I, MIB II(RFC1213)
- SNMP V1, V2c
1.2 Package Contents
Open the package carefully, and make sure that none of the items
listed below are missing. Do not discard the packing materials, in case
of return; the unit must be shipped in its original package.
 1* Wireless 802.11a/b/g Outdoor Device(EOC-5610)
 1* PoE Injector (EPE-1212)
 1* Power Adaptor(24V/0.6A)
 1* CD with User’s Manual
 1* QIG
 1* Metal strap
 1* Special screw set
1.3 Safety Guidelines
In order to reduce the risk of fire, electric shock and injury, please
adhere to the following safety guidelines.
 Carefully follow the instructions in this manual; also follow all
instruction labels on this device.
 Except for the power adapter supplied, this device should not be
connected to any other adapters.
 Do not spill liquid of any kind on this device.