User Manual

Long Range Wireless Access Point / Client Bridge Version 1.0

 IPSec Pass Through: Place a check in this box if you would like to

enable this pass through. IPSec is a VPN protocol used to implement

secure exchange of packets at the IP layer.

 Click on the Apply button to save the changes.

6.5 Wireless

 Click on the Wireless link on the

navigation drop-down menu.

You will then see three options:

wireless network, wireless

security, and wireless advanced

settings. Each option is described below.

6.5.1 Wireless Network

 The Wireless Network page allows you to configure the wireless

mode, channel, SSID, and security settings.

 Wireless Mode: Depending on the type of wireless clients that are

connected to the network, you may select A, B, G, or B/G-mixed. If

you are not sure about which clients will be accessing the wireless

networks, it is recommended that you select A or B/G-mixed for the

best performance.

 SSID: The SSID is a unique named shared amongst all the points of

the wireless network. The SSID must be identical on all points of the

wireless network and cannot exceed 32 characters. You may

specify an SSID or select one from the Site Survey.

 Site Survey: Click on the Site Survey button in order to scan the

2.4GHz frequency for devices that broadcast their SSID. Click on the