User Manual

Long Range Wireless Access Point / Client Bridge Version 1.0
50
6.4.1 WAN Settings
 Click on the WAN Settings link under the Router drop-down menu.
This page allows you to configure the WAN interface as DHCP,
Static IP, or PPPoE.
6.4.1.1 WAN - DHCP
 The WAN interface can be configured as a DHCP Client in which
the ISP provides the IP address to the device. This is also known as
Dynamic IP.
 Internet Connection Type: Select the DHCP from the drop-down list.
 Account Name: Specify an account name if your ISP has provided
you with one.
 Domain Name: Specify a domain name if the ISP has provided you
with one.
 MTU: The Maximum Transmission Unit (MTU) is a parameter that
determines the largest packet size (in bytes) that the router will send
to the WAN. If LAN devices send larger packets, the router will break
them into smaller packets. Ideally, you should set this to match the
MTU of the connection to your ISP. Typical values are 1500 bytes for
an Ethernet connection and 1492 bytes for a PPPoE connection. If