User Manual

Long Range Wireless Access Point / Client Bridge Version 1.0
49
6.3 System
 Click on the System link on the
navigation drop-down menu. You
will then see System Properties
setting, which is described below.
6.3.1 System Properties
 Click on the System Properties link under the System drop-down
menu. This page allows you to switch the operating mode of the
device, as well as specify a name and select the operating region.
 Device Name: Specify a name for the device (this is not the SSID),
 Country/Region: United States.
 Operating Mode: Select and operating mode. Configuration for
each operating mode is described in their respective chapters.
 Click on the Apply button to save the changes.
6.4 Router
 Click on the Router link on the
navigation drop-down menu. You
will then see three options: WAN
settings, LAN settings, and VPN Pass
Through. Each section is described
in detail below.