User Manual

Long Range Wireless Access Point / Client Bridge Version 1.0
39
 Data Rate: If you would like to force a data rate, you may select
one from the drop-down list. However, for best performance it is
recommended to use the Auto setting.
 Transmit Power: 20dBm.
 Fragment: Packets over the specified size will be fragmented in
order to improve performance on noisy networks.
 RTS Threshold: Packets over the specified size will use the RTS/CTS
mechanism to maintain performance in noisy networks and
preventing hidden nodes from degrading the performance.
 Protection Mode: If your wireless network is using both 802.11b and
802.g devices then it is recommended to enable this feature so that
the 802.11b devices will not degrade the performance of 802.11g
devices.
 WMM: You can select Enable or Disable WMM when doing the
communication by wireless.
 Distance (1-30km): Specify a distance between 1 and 30Km.
 Click on the Apply button to save the changes.
5.5 Management
 Click on the Management link on
the navigation drop-down menu.
You will then see six options:
administration, SNMP settings,
backup/restore settings, firmware
upgrade, time settings, and log.
Each option is described below.