User Manual

Long Range Wireless Access Point / Client Bridge Version 1.0
36
5.4.1 Wireless Network
 The Wireless Network page allows you to configure the wireless
mode, channel, SSID, and security settings.
 Wireless Mode: Depending on the type of wireless clients that are
connected to the network, you may select A, B, G, or B/G-mixed. If
you are not sure about which clients will be accessing the wireless
networks, it is recommended that you select A or B/G-mixed for the
best performance.
 SSID: The SSID is a unique named shared amongst all the points of
the wireless network. The SSID must be identical on all points of the
wireless network and cannot exceed 32 characters. You may
specify an SSID or select one from the Site Survey.
 Site Survey: Click on the Site Survey button in order to scan the
2.4GHz frequency for devices that broadcast their SSID. Click on the
BSSID link to connect to the Access Point. Click on the Refresh
button to re-scan the frequency.
5.4.2 Wireless Security
The Wireless Security page allows you to configure the wireless
security.