User Manual

Long Range Wireless Access Point / Client Bridge Version 1.0
31
5.2 Status
 Click on the Status link on the
navigation drop-down menu. You
will then see three options: Main,
Connection Status, and System Log.
Each option is described in detail
below.
5.2.1 Main
 Click on the Main link under the Status drop-down menu. The status
that is displayed corresponds with the operating mode that is
selected. Information such as Device Name, Country, Firmware
version, Ethernet MAC Address, Wireless MAC Address and Current
Time are displayed in the ‘System’ section. LAN IP Address, Subnet
Mask, Default Gateway and DHCP Client are displayed in the ‘LAN’
section. In the ‘Wireless section, the frequency, channel is displayed.