User Manual

Long Range Wireless Access Point / Client Bridge Version 1.0

 Click on the Browse button and then select the appropriate

firmware and then click on the Upgrade button.

Note: The upgrade process may take about 1 minute to complete.

Do not power off the device during this process as it may crash the

device and make it unusable. The device will restart automatically

once the upgrade is complete.

4.5.5 Time Settings

 Click on the Time Settings link under the Management menu. This

page allows you to configure the time on the device. You may do

this manually or by connecting to a NTP server.

 Manually Set Date and Time: Specify the date and time

 Automatically Get Date and Time: Select the time zone from the

drop down list and then specify the IP address of the NTP server.

 Click on the Apply button to save the changes.

4.5.6 Log

 Click on the Log link under the Management menu. The Log page

displays a list of events that are triggered on the Ethernet and

Wireless interface. This log can be referred when an unknown error

occurs on the system or when a report needs to be sent to the

technical support department for debugging purposes.