User Manual

Long Range Wireless Access Point / Client Bridge Version 1.0

 SNMP Enable/Disable: Choose to enable or disable the SNMP

feature.

 Contact: Specify the contact details of the device.

 Location: Specify the location of the device.

 Read-Only Community Name: Specify the password for access the

SNMP community for read only access.

 Read-Write Community Name: Specify the password for access to

the SNMP community with read/write access.

 Send SNMP Trap: Specify the IP address of the computer that will

receive the SNMP traps.

 Trap Community Name: Specify the password for the SNMP trap

community.

 Click on the Apply button to save the changes.

4.5.3 Backup/Restore settings, Reset to factory default settings

 Click on the Backup/Restore Setting link under the Management

menu. This option is used to save the current settings of the device

in a file on your local disk or load settings on to the device from a

local disk. This feature is very handy for administrators who have

several devices that need to be configured with the same settings.