User Manual

Long Range Wireless Access Point / Client Bridge Version 1.0

upgrade, time settings, and log. Each option is described below.

4.5.1 Administration

 Click on the Administration link under the Management menu. This

option allows you to create a user name and password for the

device. By default, this device is configured without a user name

and password admin. For security reasons it is highly recommended

that you create a new user name and password.

 Name: Specify a user name into the first field.

 Password: Specify a password into this field and then re-type the

password into the Confirm Password field.

 Click on the Apply button to save the changes.

4.5.2 SNMP Settings

 Click on the SNMP Settings link under the Management menu. This

option allows you to assign the contact details, location, and

community name and trap settings for SNMP. This is a networking

management protocol used to monitor network-attached devices.

SNMP allows messages (called protocol data units) to be sent to

various parts of a network. Upon receiving these messages, SNMP-

compatible devices (called agents) return data stored in their

Management Information Bases. .