User Manual

Long Range Wireless Access Point / Client Bridge Version 1.0

 Data Rate: If you would like to force a data rate, you may select

one from the drop-down list. However, for best performance it is

recommended to use the Auto setting.

 Transmit Power: 20dBm

 Fragment: Packets over the specified size will be fragmented in

order to improve performance on noisy networks.

 RTS Threshold: Packets over the specified size will use the RTS/CTS

mechanism to maintain performance in noisy networks and

preventing hidden nodes from degrading the performance.

 Protection Mode: If your wireless network is using both 802.11b and

802.g devices then it is recommended to enable this feature so that

the 802.11b devices will not degrade the performance of 802.11g

devices.

 WMM: Enable wireless Quality of Service

 Distance (1-30km): Specify a distance between 1 and 30Km.

 Click on the Apply button to save the changes.

4.5 Management

 Click on the Management link on the

navigation drop-down menu. You will

then see seven options:

administration, SNMP settings,

backup/restore settings, firmware