User Manual

Long Range Wireless Access Point / Client Bridge Version 1.0
23
 ACL (Access Control) Mode: You may choose to Disable, Allow
Listed, or Deny Listed MAC addresses from associating with the
network. By selecting Allow MAC in the List, only the address listed in
the table will have access to the network; all other clients will be
blocked. On the other hand, selected Deny MAC in the List, only the
listed MAC addresses will be blocked from accessing the network;
all other clients will have access to the network.
 MAC Address: Enter the MAC address.
 This table lists the blocked or allowed MAC addresses; you may
delete selected MAC address or delete all the addresses from the
table by clicking on the Delete button.
 Click on the Apply button to save the changes.
4.4.3 Wireless Advanced Settings
 Click on the Wireless Advanced Settings link. On this page you can
configure the advanced settings to tweak the performance of your
wireless network. Options available are: data rate, transmit power,
fragmentation threshold, RTS threshold, protection mode and
distance.