User Manual

Long Range Wireless Access Point / Client Bridge Version 1.0
14
2. System: This menu includes the system properties, IP and Spanning
Tree settings.
3. Wireless: This menu includes status, basic, advanced, and security.
4. Management: This menu includes the admin setup, SNMP, firmware
upgrade, and save/restore backup.
4.2 Status
 Click on the Status link on the navigation
drop-down menu. You will then see three
options: Main, Wireless Client List, and
System Log. Each option is described in
detail below.
4.2.1 Main
 Click on the Main link under the Status drop-down menu. The status
that is displayed corresponds with the operating mode that is
selected. Information such as Device Name, Country, Firmware
version, Ethernet MAC Address, Wireless MAC Address and Current
Time are displayed in the ‘System’ section. LAN IP Address, Subnet
Mask, Default Gateway and DHCP Client are displayed in the ‘LAN’
section. In the ‘Wireless section, the frequency, channel is displayed.