User Manual

Long Range Wireless Access Point / Client Bridge Version 1.0
13
 Select and operating mode from the list (Access Point, Client Bridge,
or Client Router) and then click on the Apply button.
4 Access Point Operating Mode
4.1 Logging In
 To configure the device through the web-browser, enter the IP
address of the device (default: 192.168.1.1) into the address bar of
the web-browser and press Enter.
 Make sure that the device and your computers are configured on
the same subnet. Refer to Chapter 2 in order to configure the IP
address of your computer.
 After connecting to the IP address, the web-browser will display the
login page.
 Specify admin for both the user name and password.
 After logging in you will graphical user interface (GUI) of the device.
The navigation drop-down menu on left is divided into four sections:
1. Status: Displays the overall status, connection status, and event log.