User Manual

Long Range Wireless Access Point / Client Bridge Version 1.0
12
3 Switching Between Operating
Modes
This device can operate in three modes: Access Point, Client Bridge,
and Client Router. This chapter will describe how to switch between
operating modes.
3.1 Logging In
 To configure the device through the web-browser, enter the IP
address of the device (default: 192.168.1.1) into the address bar of
the web-browser and press Enter.
 Make sure that the device and your computers are configured on
the same subnet. Refer to Chapter 2 in order to configure the IP
address of your computer.
 After connecting to the IP address, the web-browser will display the
login page.
 Specify admin for both the user name and password.
 After logging in, you will see the graphical user interface of the
device. Click on the System Properties link under the System
navigation drop-down menu.