User Manual

Long Range Wireless Access Point / Client Bridge Version 1.0
10
2.3 Mounting Kits
The images below depict the standard and optional mounting kits.
2.4 IP Address Configuration
This device can be configured as a Bridge/Router or Access Point. The
default IP address of the device is 192.168.1.1 In order to log into this
device, you must first configure the TCP/IP settings of your
PC/Notebook.
1. In the control panel, double click Network Connections and then
double click on the connection of your Network Interface Card
(NIC). You will then see the following screen.
Standard
Pole Mount
Optional
Wall Mount
Optional
Window Mount