User Manual

Table Of Contents
23
Configuring the Access Point
Configuring for Standalone Operation or for Management by FlexMaster
Figure 12. Type the FlexMaster server URL
NOTE: Instructions on how to verify that the Access Point and FlexMaster can communi-
cate with each other are provided in “Check the TR069 Status (FlexMaster Management
Only)” on page 41.
Step 5: Disconnect the Access Point from the
Administrative Computer
You are now ready to attach the mounting brackets to the mounting surface and to the
Access Point. Before continuing, make sure that you disconnect the Access Point from the
power source and from the administrative computer.
1. Disconnect the power adapter of the PoE injector from the power source.
2. Verify that the PWR LED on the back of the Access Point is off.
3. Disconnect the Ethernet cable from the administrative computer’s Ethernet port.
Step 6: Restore the Administrative Computer’s Network
Settings
1. On your Windows XP or Windows 2000 computer, open the Network Connections (or
Network and Dial-up Connections) control panel according to how the Start menu is
set up:
On Windows XP, click Start > Control Panel > Network Connections.