User Manual

EnGenius Mesh AP-EOA-8670 User Manual & Configuration Guide
EnGenius Mesh AP-EOA-8670 User Manual & Configuration Guide
Page 51 of 67
7.6 Management > NMS Addresses
NMS address is used for the system to report back to Network Management System
located outside of the network. Figure 7.6.1 illustrates the NMS server address
configuration page.
Figure 7.6.1 NMS Address List
NMS address configuration page contains the following parameters:
• NMS Address List – List of NMS server.
• “Modify” button to edit the selected entry.
• “Remove” button to delete the selected entry.
• “New Entry” button to add new entry to the NMS server.
Figure 7.6.2 illustrates the NMS address configuration page for add or edit.
Figure 7.6.2: NMS Addresses – add or edit page
NMS Address – add page contain the following parameter:
• Address – Enter the IP address of the NMS server.
• Port – Enter the port of the NMS server which is waiting for the report.
• Interval – Enter the interval of report to NMS server.