User Manual

EnGenius Mesh AP-EOA-8670 User Manual & Configuration Guide

Page 48 of 67

7.5 Management > Trap

Trap used to report an alert or other asynchronous event about managed system.

Figure 7.5.1 illustrates the trap configuration page.

Figure 7.5.1: Trap configuration page

Trap configuration page contains the following parameters:

• Active – Enable or disable trap report.

• Configuration – Enable or disable report on configuration issue.

• Security – Enable or disable security trap report.

• Wireless – Enable or disable wireless trap report.

• Operational – Enable or disable operational trap report.

• Flash – Enable or disable flash trap report.

• Tftp – Enable or disable tftp trap report.