User Manual

EnGenius Mesh AP-EOA-8670 User Manual & Configuration Guide
EnGenius Mesh AP-EOA-8670 User Manual & Configuration Guide
Page 37 of 67
dropped by this device. Default value is 10.
• Max packet size: Maximum packet size of the DHCP discover packet.
Normally specify a large number of packet size is recommended. Default
value is 1400.
• “Apply” button to save any changes made. Please reboot to enable new
settings.
• “Modify” button to edit current selection.
• “Remove” button to delete current selection.
• “New Entry” button to add server IP or Interface.
Figure 6.7.2 illustrates the add or edit configuration page.
Figure 6.7.2 Server or Interface configuration page.
The add or edit configuration page contains the following parameters.
• Type – Server IP or interface list
• Interface Name – Once the “type” drop down menu is changed to interface,
interface name selection drop down menu will appear for the users to make
selection on the interface where the DHCP server can be reach. The interface
also must include the interface where the client can be reach.
• IP – Specify the IP address of the backend DHCP server.
• Comments – Additional comments on this entry.
• Active – Enable or disable this entry.
• “Apply” button to save any changes made. Please reboot to enable new
settings.