User Manual

connection speed.

Layer 2 Isolation

Select the Radio button to enable or disable Layer 2 Isolation. Layer 2 isolation

prevents communication between wireless stations associated to different APs

4.6.2 Advanced Settings (Client Bridge / Client Router)

Fragment Threshold

Specify package size during transmission. If large amount of client are accessing to

the network, specify small number of the fragment length in order to avoid collision.

RTS Threshold

Specify Threshold package size for Request To Send (RTS). Using small number of the

threshold will cause RTS packets to be sent more often to consuming more of the

available bandwidth. In addition, if the heavy load traffic occurs, the wireless

network can be recovered easily from interferences or collisions.

Preamble Type

Select the Radio button to choose Long Preamble or Short Preamble. Long Preamble

can increase the capability of wireless network and wireless signal range. Short

Preamble can increase the efficiency of the wireless network.

802.11g Protection

Select the Radio button to Protect types. When enable the protection mode, every

time the packet is transmitted, it has to wait the CTS is received. In addition,

Protection mode can prevent the collision but it will slow the wireless transmission

speed.

Tx Power

Auto power and the biggest is 20dBm

Distance

Specify distance rage between AP and Clients. Longer distance may lose high

connection speed.

4.7 Wireless Access Control List

Wireless Access Control List is used to Allow or Deny wireless clients by their MAC addresses,

accessing the Network. You can manually add a MAC address to restrict the permission to access