User's Manual

Refresh

Press Refresh to scan again.

Auction: If the Access Point is suppressed its own SSID, SSID section will be blank, the SSID must be

filled in manually.

4.2.3 WDS Bridge Mode

Wireless Mode

Select the desired 802.11 standard modes or SuperG mode. There are four different

modes and they are 802.11b, 802.11g Only, 802.11 b/g mixed and SuperG.

Channel / Frequency

The channel availability is based on the country’s regulation.

Apply / Cancel

Press Apply to apply the changes or Cancel to return previous settings.

MAC Address

Enter the Access Point’s MAC address that you would like to extend the wireless area

into the MAC address filter.

Mode

Select Disable or Enable from the drop down list.

Apply / Cancel

Press Apply to apply the changes or Cancel to return previous settings.

Auction: The Access Point that you would like to extend the wireless area must enter your Access

Point’s MAC address. Not all Access Point supports this feature.