User's Manual

Login
Specify the user name supplied by your ISP.
Password
Specify the password supplied by your ISP.
Service IP Address
Specify the service IP address supplied by your ISP.
Connection ID
Specify the connection ID supplied by your ISP.
MTU
Specify the Maximum Transmit Unit size. It is recommended you accept the default
setting of Auto. Otherwise, packets will be fragmented downstream if the MTU is set
too high or too low, which impacts network performance. In extreme cases, an MTU
setting that is too low can prevent the ENH700EXT from establishing some
connections.
Type
Select a connection type from the drop-down menu. Choices are:
• Keep Connection = device connects to the Internet automatically.
• Automatic Connection = device connects to the Internet automatically when the
traffic goes through the Internet and disconnects after a period of idle time
elapses.
• Manual Connection = device connects to the Internet manually.
Idle Timeout
If the ENH700EXT is configured for Automatic Connection, specify the maximum
amount of time the device can remain idle before disconnecting.
Enable PPTP pass through
on VPN Connection
Check PPTP pass through on VPN Connection. Otherwise, the ENH700EXT will not
be able to connect to the Internet via PPTP.
Enable IPSec pass through
on VPN Connection
Check IPSec pass through on VPN Connection. Otherwise, the ENH700EXT will not
be able to transmit data using the IPSec protocol.
Enable L2TP pass through
on VPN Connection
Check L2TP pass through on VPN Connection. Otherwise, the ENH700EXT will not be
able to connect to the Internet using L2TP.
Apply / Cancel
Click Apply to apply the changes or Cancel to discard your changes and return to the