User's Manual

amount of time the device can remain idle before disconnecting.
Apply / Cancel
Click Apply to apply the changes or Cancel to discard your changes and return to the
previous settings.
7.4 PPTP (Point-to-Point Tunneling Protocol)
Select PPTP as your WAN connection type if your ISP uses a Point-to-Point-Tunneling Protocol (PPTP)
connection. There are two WAN interface types you can select: Dynamic IP Address and Static IP
address. Select Static if your ISP assigned you the IP address, subnet mask, gateway, and DNS server
addresses. In most cases, select Dynamic.
Dynamic IP Address
WAN Interface Type
Select Dynamic IP Address as your WAN Interface.
Hostname
Specify the Hostname is given by your Internet Service Provider.
Static IP Address
WAN Interface Type
Select Static IP Address as your WAN Interface.
IP Address
Specify the static IP address for the ENH700EXT WAN Interface.
IP Subnet Mask
Specify the WAN subnet mask.
ENH700EXT IP Address
Specify the ENH700EXT WAN IP address.