User's Manual

causes the sending device to discard the current packet and move on to the next.
Preamble Type
Tells the receiver that data is on the way. The preamble allows the receiver to
acquire the wireless signal and synchronize itself with the transmitter. Select Long
Preamble or Short Preamble. Long Preamble can provide better wireless LAN
compatibility with legacy devices, while Short Preamble can provide better WLAN
performance.
802.11g Protection
If you enable protection mode, every transmitted packet must wait until CTS is
received before it can be sent. Protection mode can prevent collision, but slows
wireless transmission speeds.
Tx Power
Auto Transmitted Power
Distance
Specify the distance between Access Points and clients. Longer distances may drop
high-speed connections.
5.7 Wireless Access Control List
Use the Wireless Access Control List provide or deny network access to wireless clients according to
their MAC addresses.
Enable Wireless Access
Control
Place a Check to enable Wireless Access Control.
Description
Enter a description for the MAC address you want to add.
MAC Address
Specify the MAC address.
Add
Click Add to add the MAC address.
Reset
Click Reset to discard your entries.
MAC Address Filtering
Table
Check all the conditions you added.
Delete Selected
Check an option below the Select column and click Delete Selected to delete the