User's Manual

5.2.2 Access Point Mode (5 GHz)
Radio
Select the appropriate radio button to enable or disable the ENH700EXT’s wireless
functions.
Enable SSID#
The ENH700EXT supports four SSIDs. Each SSID can be configured to use a different
VLAN tag.
ESSID
ESSID is the name of your WLAN. In an area where more than one WLAN is present,
using a different ESSID allows you to separate the traffic. Any device you want to
participate in a particular WLAN must use the same ESSID. The default ESSID is
EnGenius. After specifying each ESSID, specify the VLAN ID for each ESSID.
5G Wireless Settings
Band
Select the IEEE 802.11 standard operating in your network environment.
Channel
You could select a channel you want.
Data Rate
Shows the available transmit data rate of the WLAN. The data rate affects
throughput. If you select a low data rate value, for example, the throughput is
reduced but the transmission distance increases.
Auto Channel
By default, this option is disabled. If you click Enable, the ENH700EXT searches all
valid channels, then decides which channel is “cleanest” for transmissions and
change to that channel automatically.
Apply / Cancel
Click Apply to apply the changes or Cancel to discard your changes and return to the
previous settings.
Note: If you do not have experience setting data rates, do not change the default setting.