User's Manual

Chapter 4 Introducing the Web Configurator
The ENH700EXT has a built-in Web Configurator that lets you manage the unit from any location
using a Web browser that supports HTTP and has JavaScript installed.
4.1 Logging in to the Web Configurator
After configuring the computer for TCP/IP using the procedure appropriate for your operating system,
use that computer’s Web browser to log in to the ENH700EXT Web Configurator.
1. Launch your Web browser.
2. In the browser address bar, type 192.168.1.1 and press the Enter key.
Note: If you change the ENH700EXT’s IP address, enter the appropriate IP address.
3. When the Windows Security window appears, type admin as the username in the top field and
type admin as the password in the bottom field.
4. Click OK
You are now ready to use the instructions in the following chapters to configure the ENH700EXT.