User's Manual

EMP9605H
High Power 2.4GHz 11n Mini-PCI Adapter
2.4GHz IEEE802.11b/g/n 2T2R 300Mbps High Performance
Features
Industrial-best Sensitivity -96dBm@6Mbps, -82dBm@54Mbps, -97dBm@MCS0/MCS8,
-76dBm@MCS7/MCS15
Supports IEEE 802.11b/g and 802.11n Compatible among multiple Wifi networks
Enables Bandwidth up to 300Mbps Fast throughput for 802.11n in 2.4GHz
2T2R Design Architecture Higher and greater reliable throughputs over range
MMCX Antenna Connector Two MMCX connectors
Specification
Hardware Specification
Standard WECA(WiFi & WiFi5 Compliance), IEEE802.11b/g/n, RoHS
Chipset Atheros AR9220
Physical Interface 32-bit Mini-PCI Type III A
2 x MMCX Connector
Power Requirements Advanced Power Consumption Management
Jump Wire ON : External DC power in supported, Voltage=5V
Jump Wire OFF : Only Support DC Power from Mini-PCI Slot=3.3V
Continuous Tx@802.11b/g <1.7A Tx Current Consumption
Continuous Tx@802.11n <2A
Rx Current Consumption Continuous Rx <450mA
Card on Current Data Communicating with AP <450mA
Current Consumption Information
Sleep Current Sleep Mode <100mA
RF Specification
Frequency Band
802.11b/g/n
2.412GHz ~ 2.472GHz
Data rate 300 Mbps
Receive Sensitivity (Typical) 802.11n
(20MHz)
-97dBm @ MCS0
-78dBm @ MCS7
-96dBm @ MCS8
-76dBm @ MCS15
802.11n
(40MHz)
-94dBm @ MCS0
-76dBm @ MCS7
-94dBm @ MCS8
-75dBm @ MCS15
802.11g
-96dBm @ 6Mbps
-82dBm @ 54Mbps
802.11b
-99dBm@1Mbps
-93dBm@11Mbps
Software Specification
Security WPA, WPA2, 64/128 bits WEP, TKIP and AES