User's Manual

EMP5605H
High Power 5GHz 11n Mini-PCI Adapter
5GHz IEEE802.11a/n 2T2R 300Mbps High Performance
Features
Industrial-best sensitivity -90dBm@6Mbps, -72dBm@54Mbps, -89dBm@MCS0/MCS8,
-70dBm@MCS7/MCS15
Enables bandwidth up to 300Mbps Fast throughput for 802.11a and 802.11n
2T2R design architecture Higher and greater reliable throughputs over range
MMCX antenna connector Two MMCX connectors
Specification
Hardware Specification
Standard WECA(WiFi & WiFi5 Compliance), IEEE802.11a/n, RoHS
Chipset Atheros AR9220
Physical Interface 32-bit Mini-PCI Type III A
2 x MMCX Connector
Power Requirements External DC power in supported, Voltage=5V
Continuous Tx@802.11a <1.7A Tx Current Consumption
Continuous Tx@802.11n <2A
Rx Current Consumption Continuous Rx <600mA
Card on Current Data Communicating with AP <450mA
Current Consumption Information
Sleep Current Sleep Mode <100mA
RF Specification
Frequency Band
802.11a
5.15 ~ 5.35GHz, 5.725~5.825GHz
Data rate 300 Mbps
Receive Sensitivity (Typical) 802.11n(20MHz)
-89dBm @ MCS0/MCS8
-70dBm @ MCS7/MCS15
802.11n(40MHz)
-86dBm @ MCS0/MCS8
-68dBm @ MCS7/MCS15
802.11a
-90dBm @ 6Mbps
-72dBm @ 54Mbps
Software Specification
Security WPA, WPA2, 64/128 bits WEP, TKIP and AES
Hardware-base IEEE 802.11i encryption engine
Environment & Mechanical
Temperature Range -30°C to 80°C
Humidity (non-condensing)
0%95% typical
Dimensions 66mm (L) x 59.5mm (W) x 5mm (H)
Weight 16g