User's Manual
Table Of Contents
- 1 Product Overview
- 2 Installation
- This chapter describes how to install the ENH500.
- Select the optimal locations for the equipment using the following guidelines:
- 3 Wireless Network Modes
- 4 Configuring Your Computer for TCP/IP
- 5 Status
- 6 System
- 7 Wireless Configuration
- 8 LAN Setup
- 9 Router Settings
- 10 Management Settings
- 11 Network Configuration Examples
- Appendix A – Troubleshooting
- Appendix B – Specifications
- Appendix C – Glossary
- Appendix D – Statements of Conformity
4.5 Logging into the ENH500
After completing the TCP/IP settings from the beginning of the Chapter, you can now access
the web-based configuration menu.
1. Open your web browser.
2. Enter IP 192.168.1.1 into your address bar.
If you have changed the ENH500 LAN IP address, make sure you enter the
correct IP Address.
3. After successfully connecting to the ENH500, a browser pop-up with a Windows Security
notice will appear. Please enter the correct Username and Password.
4. The default Username and Password are both admin.
If you have changed the Username and Password, please enter the correct
Username and Password.