User's Manual

Table Of Contents
3.2 Access Point with WDS Function Mode
The ENH202 also supports WDS functionality while in Access Point Mode. Simply configure
other Access Points and the associated MAC addresses in order to enlarge the wireless area by
enabling WDS Link Settings. WDS functionality can support up to 8 different AP MAC
addresses. Please note that this mode is rarely used due to the nature of directional antennae.
Consequently, the wireless clients need to be located in the path of the ENH202s directional
antenna and be within in the range to send signal back to the ENH202.
Not every Access Point supports WDS in Access Point Mode. It is
recommended to use ENH202s if you would like to utilize this functionality.