User's Manual

2 ENH200 Multi-Function Instruction Guide
2.1 Access Point
In the Access Point Mode, ENH200 function likes a central connection for any stations or clients that
support IEEE 802.11b/g/n network. Stations and Client must configure the same SSID and Security
Password to associate within the range. ENH200 supports 4 different SSIDs to separate different
clients at the same time.
2.2 Access Point with WDS Function
ENH200 also supports WDS function in Access Point Mode without losing AP’s capabilities. Configure
others Access Point’s Wireless MAC Address in both Access Point devices to enlarge the wireless area
by enabling WDS Link Settings. WDS function can support up to 8 different AP’s MAC addresses.
Not every Access Point device has support WDS in Access Point Mode. It is
recommended using ENH200 if you would like to use this service.
ENH200
Client
Client
Client
ENH200
Client
WDS
ENH200
Client
Client
Client
Client
SSID1
SSID2
SSID3
SSID4
Ethernet
Client
Client Client