User's Manual

10.2 Client Bridge Mode
Client Bridge Mode functions like a wireless dongle. It must connect to an Access Point/AP Router to
join the network.
Please refer to the last section to check Access point’s configuration.
Client Bridge
Step1 Login to the web-based configuration interface with default IP
192.168.1.1
Step2 Follow region’s regulation.
Step3 Select Operation Mode to Client Bridge from System Properties.
Step4 Use site survey to scan Access Points that are available in nearby area.
Step5 Select the AP you would like to associate with.
Step6
Setup the authentication settings that match to the Access Point’s
setting.
Step7 Apply to process all the configurations.
Client Bridge’s IP setting must match to the Access Point’s subnet.
Access Point /
Wireless Router
Internet
ENH200
Client
192.168.1.2
192.168.1.1 192.168.1.10